NMR AND THE STABILITY OF H₂0 Structure Enhancement
(& TEST RESULTS WITH M-WATER^®)

The primary use of NMR in regards to drinking water is to determine relative changes in H₂0 cluster size for any given solution. The NMR Graph compares eight different water products, some with very low and some with very high dissolved solids. However, it is accepted that the Line Width in a frequency of Hertz from testing any given water sample will provide at least a relative comparison between different water products in terms of H₂0 cluster size. As already indicated on the NMR Graph it is clear that M-Water in both the concentrated Primordial version and activated water created by adding two teaspoons to a gallon of water that the Line Width is far lower than the other samples tested.

Not all water products on the market today have been tested directly by me or associates working in cooperation with me as presented on the NMR Graph. There is one drinking water product, not presented on the NMR Chart that proposes an ideal Line Width in the same range as M-Water, which also infers that the molecular sizes of H₂0 clusters are also in a similar range when considering water in an ideal form for hydration purposes. However, the company that makes this product only proposes that there is an ideal Line Width and does represent that they have achieved it in terms of the consumer available product. This topic will be presented further on as it relates to readily available information on the US Patent website.

However, the M-Water Activation Technology is absolutely the only approach that does not depend on introducing another substance to water in order to change its molecular structure enhancement size that can in turn be measured by Line Width. The issue of mixing water with any substance or gas gets to the core of mainstream criticism concerning functional waters that are presented as having smaller clusters of H₂0 in solution. Dr Martin Chapman, a renounced Professor of Applied Science at London South Bank University in England who has dedicated much of his career to the study of water, states on his website that the existence of added gasses and substances will hinder the reliability of NMR tests and in addition do not provide reliability in terms of stability of any particular structure enhancement tendency. This may seem a little complicated, but what it comes down to is unless a method of inducing changes into water that are supposed to represent the use of external forces only involves no added gas or solids then the end product cannot be viewed as reliable.

The problem with some well know functional water products that are purported to be made with external forces only – other than M-Water – to make an end drinking water product that has smaller H₂0 structure enhancement as verified by NMR Line Width is that they all involve the adding of solids or gas to water or allow the activated water to come in contact with additional container material that increases dissolved solids.

The M-Water Technology does not involve adding any solid or gas and not even having the original starting water make contact with any surface other than the original plastic or glass containers used to create motion in water and to simultaneously expose water to very, very low level electromagnetic input. Metal containers are not used at all in the M-Water Activation Process, which is because this will cause metal ion contamination. The spring water used to make M-Water as it goes through the activation process is very low in particulates because of prior multi stage filtration: one part per million. Therefore, any possibility of creating contamination in water by adding any additional particulates via a solid, gas or additional materials from containers is eliminated in the M-Water Activation Process. The only solids that exist in M-Water as the final product is related to the PET plastic composition of the bottles, which is so minimal as to not be relevant (PET is the next best thing to glass in terms of low infusion of particulates from a container).

What is also indeed amazing about the test results involving different water products is that dissolved solids do not always lead to a smaller H₂0 cluster size. It appears that adding colloidal minerals and electrolytes and with naturally mineralized water that the H₂0 cluster sizes is larger as compared to M-Water. This is most likely due to the fact that the added solids actually increase the over all size of the H₂0 clusters due to their added volume and therefore will slow down the spin of the cluster to reveal a higher Line Width in Hertz.

In conclusion, the claims by many other companies of creating functional water through external forces only is simply not true. The only product that totally eliminates external substances from altering the end product in terms of stabilizing smaller H₂0 structure enhancement tendencies is M-Water.

TESTING M-WATER AT A DEFAULT TEMPERATURE
(& OTHER INTERESTING PERSPECTIVES REGARDING WATER)

The Line Widths in Hertz represented on the NMR Graph were all obtained at 30 degrees Celsius. The normal default temperature of 27 degrees Celsius was also used in order to compare M-Water to functional water products that have patent references on the US Patent website. By reviewing one of these patents it is clear that the goal is to achieve a Line Width of approximately 60 to 70 Hertz, while the other patent only reveals that the Line Width has been lowered by 30 to 40 Hertz as compared to reverse osmosis water. However, using just a comparison with reverse osmosis water only makes it possible to acknowledge of decrease in Line Width, but this decrease could still very easily result in a Line Width number greater than 100 Hertz that is found in many regular sources of water such as tap water. Both of these patents reveal processes that are not based on using external forces only in that solids, gases and container contaminants are involved, contrary to any claims made.

At the standard default temperature of 27 degrees Celsius used in NMR tests for solutions, M-Water in the Primordial Version had a Line Width of 62 Hertz. The activated water to which the Primordial M-Water was added had a Line Width of 59 Hertz. This corresponds directly to the range that many experts claim is ideal for drinking water in terms of the relative size of the H₂0 structure enhancement based on NMR testing at the default temperature of 27 degrees Celsius. And again, M-Water is the only one that can claim stability, which is because the M-Water Activation Technology eliminates any possibility of another substance altering or contaminating the outcome. All other activation approaches use substances, gases or container materials that will deter from the stability of molecular size as measured by NMR with Line Width in Hertz.

Another fascinating facet of Line Width measurements of M-Water is that Primordial M-Water has a slightly higher number than the activated water created by adding to two teaspoons to a gallon of clean drinking water. The two water sources were exactly the same for both samples, with the water source coming from the same Oregon spring. The difference is small, but brings to bear other facets what M-Water is all about. Drinking small amounts of the Primordial M-Water right out of the bottle has been demonstrated to be more beneficial based on subjective qualitative perspective – according to anecdotal feedback – than only drinking the activated water created by adding two teaspoons of the Primordial M-Water per gallon of clean drinking water and then drinking one to three liters a day (the average consumption range for an adult). The foundation of the M-Water program is to drink a plentiful amount of M-Activated Water every day, but at the same time to enhance the benefits it is recommend that a person drink a small amount of the Primordial M-Water right after waking up and right before going to sleep.

The deeper issues of making M-Water have to do with an intangible that I simply call Vibrational Load. It is very clear to most people who drink some of the Primordial M-Water right from the bottle every day that there is a greater sense of vitality form just drinking larger volumes of the M-Activated Water alone. The well established practice of Homeopathy, with homeopathic remedies regarded as legal and part of the pharmacopoeia in the USA and around the world, depends on manufacturing remedies whose inherent power are based on ever increasing dilution of the original substance in solution, which continues on way past the point where all substance has been removed through dilution. It may seem counter intuitive to many people to consider the power of a product to be based on having less of it in terms of tangible solid substance, but as with M-Water it is all about how to best deliver the frequency signature to the user. Of course, with the revolutionary approach of creating stable H₂0 structure enhancement changes in making M-Water there is no starting substance except the very low level of particulate matter that will exist in any water source no matter how much it has been filtered (even distilled water will have some level of particulates). And it is also important to note that M-Water is not a homeopathic remedy targeted to specific health issues but instead targeted in a broader sense to the holistic needs of a multi cellular organism to remain continuously hydrated and the health benefits that ideal hydration imparts. The comparison here is to clarify that intuition about what is real and practical, such as the need to take a large amount of some tangible substance for health benefits, is often wrong in the modern day world. Human beings have been wrong down through time in terms of endorsing what is thought to be real only to learn that the opposite happens to be what is true all along.

Although it may seem counterintuitive to many people in the modern world, including experts as well as the general public, that subtle frequency only ascertained indirectly through complicated science has tremendous impact on the health of a living organism – this is my unwavering conviction based on clinical observation and sophisticated scientific logic. Faulty gut feelings about a proposed reality has plagued human beings down through time, and particularly in modern times with the dominance of mainstream medicine using empirical mechanism and reductionism to deal with all health issues physically, mentally and emotionally. An example of a previous ridiculous scientific assertion is the following: at one time scientists in Western Europe believed that the earth was the center of the universe and the sun and stars revolved around it (since anyone could see that the sun and stars were very small and the earth was very large), with severe punishment and even the death from challenging the status quo. Of course, now this assertion about the earth as the center of the universe seems silly, but this is a familiar pattern repeating itself right now in terms of medicine. People like me that are pointing out the fallacy of using drugs and other toxic remedies and treatment for the total health of human beings (and even to many supplements) and bring forth new knowledge that is fought against with a high level of emotional reactivity by the government in concert with private industry. In the modern world, and particularly in the United States that is supposed to honor freedom of speech, bringing forth new healthcare products and services can be challenged to the point of inventors and proponents facing criminal prosecution and going to jail for years no matter what the validity or benefit there is to humankind. I urge every reader to step through the doorway of greater truth with me when it comes to creating long lasting and abundant health and to discard the primitive and outdated understanding of reality about health forced on all of us by corrupt institutions. We can all stand before the universe around us and see the higher truth of what health is all about.

With water that imparts greater vitality to the cells for improving the health of the over all organism it depends on the integrity of the vibrational strength that is carried by the H₂0 clusters in water. Therefore, as this strength of Vibrational Load goes down it some how appears to slightly decreases the cluster size (based on the preliminary NMR Line Width results). It might be possible that increased vibrational load causes subtle differences in how long it take for a molecular cluster to spin or maybe it even slightly increases the total three dimensional volume of a molecular cluster. These are two obvious possibilities. But the differences in Line Width with Primordial M-Water and M-Activated Water are very small and most likely not within a range that is meaningful in regards hydration issues.

What is truly meaningful based on the approximate sameness of the Line Width of Primordial M-Water and M-Activated Water is that the water a person adds the Primordial M-Water to takes on the same properties of molecular structure enhancement. This is called water memory transfer, which was first proposed by the Nobel Prize winning Chemist Linus Pauling, already reinforced by alternative science perspectives in terms of the subtle qualities of water and now further reinforced by mainstream scientists who are engaged in water crystallization pattern studies based on molecular memory transfer without the need for a solid intermediary. Mainstream studies demonstrate how molecular reorganization memory can be passed on from molecule to molecule very quickly once initiated until an entire solution takes on the new pattern (based on a study subsequent article written by Alexandra Goho presented in Science News, September 11, 2004, Volume 166, No 11). Alternative studies by Masaru Emoto in Japan make it clear that the molecular patterning of water can be initiated without the need for a solid at all; and he has taken thousands of photos to demonstrate to prove his point (refer to the alternative science section that presents photos of M-Water and regular water to show the significant crystallization pattern differences)! Once a molecular repatterning tendency is set in motion it clear from the mainstream studies that whatever starts this repatterning is irrelevant: the molecular repatterning takes on a life of its own until the entire solution has changed (this self sustaining replication tendency is actually a component in laboratory models of creating life out of non-living matter). Because the M-Activated Water is almost the same in terms of molecular cluster size as Primordial M-Water as determined by Line Width then this means the properties of M-Water as a structure enhanced water are passed on from the original product to all drinking water it is added and without the need for even a starting solid. This fact is crucial in understanding the phenomenon of creating M-Water from any water source that has low particulate levels: for the first time there is clear evidence that the re-patterning of water can be initiated without a dissolved solid, and the rest is already known in terms of how it is possible for a pattern memory to become transferred from molecule to molecule to change the entire volume of a solution. M-Water is unique among all the functional drinking waters available in the world today in this regard, or at least the ones I am currently aware of.

HYDRATION PRINCIPLES

Based on the most recent discoveries in chemistry concerning the movement of water in and out of the cell, it is easy to understand the hydration benefits from drinking a water that has relatively smaller H₂0 cluster size. The 2003 Nobel Prize in Chemistry was awarded for the discovery of the Aquaporin, which clarifies that there are specific small channels (called Aquaporins) that allow only one H₂0 molecule at a time to enter and exit the cell. In addition, this discovery reveals that these single water molecules cannot have any additional solids or electrical charge associated with them. This new information about hydration negates any real benefit from drinking water that has colloidal minerals or other substances added to it or water that has had its electrical charge increased with ionization. All the companies that sell colloidal mineral additives or provide ionization technologies or cause water to be altered in any way based on additional dissolved solids and electrical charge are not improving cellular hydration throughout the body after passage of fluids in the gut to the lymph system and then the blood. In fact, all of these products are creating dehydration! Before single water molecules can enter the Aquaporin the proteins on the cell membrane must remove all solids and electrical charge so that simple and neutral water molecules can enter into the cell and eventually be able to leave the cell quickly and efficiently.

The added quality I have identified as Vibrational Load is on a micro level that by sheer logic must transcend the atomic level in terms of electron charge or substances. This Vibrational Load is most likely based on subatomic and or quantum memory that resonates in each H₂0 cluster and therefore in each single H₂0 molecule. This is necessary logical assumption and must be the case or otherwise adding additional electrical charge to M-Water would slow down hydration of water into the cells throughout the body and it is obvious that the opposite is true (preliminary hydration studies illustrate that M-Water improves cellular hydration along with abundant anecdotal evidence). In other words, the vibrational quality of M-Water must be very subtle and not overt and possibly not testable with even the most advanced technologies available currently. However, indirect biological response studies can be used to verify the substantial difference between M Water and regular water as well as other functional water that may even be in the same Line Width range as M-Water. This means that M-Water does not depend on added substances or a gross increase in electrons. It is my contention that the Subtle Vibrational Load is implicitly involved in whether or not any drinking water is biocompatible to the cell membrane and therefore to the Aquaporins that single water molecules must pass through, which is based on current research on the way in which Subtle Vibrational Resonance of the cell itself modulates chemical activity.

Because the relative size of H₂0 clusters is smaller than most standard drinking water (based on a comparison with tap water and other types of functional water products) then it makes sense that it will take less time for the cell membrane to break down low particulate M-Water into single H₂0 molecules. This in turn will allow quicker and more efficient hydration into the cells. In a subsequent section on the physics of H₂0 structure enhancement it is clear that low particulate water can aggregate into millions upon millions of H₂0 clusters. On the other hand M-Water, based on the mechanics of that activation process, can maintain clusters as small as 20 H₂0 molecules hooked together. With a significant array of smaller clusters M-Water can then transport the cells and be broken down into single H₂0 molecules faster than what will take place if all the structure enhancement is very large. In addition, because of the need for the cell to separate all solids and electrons, altered water created by adding minerals and other substances as well as electrified water with ionization will only slow the movement of water to the interior of the cell. Only water with smaller structure enhancement tendencies such as M-Water that has been created with true external forces only can provide the cells with the optimum form for quicker reduction to one H₂0 molecule at a time and therefore quicker transport via the Aquaporin to the inside of the cell. Quicker hydration will serve a two fold purpose: 1) save cellular energy spent by the cells to transform any given water into the right form for Auquaporin passage and 2) support the all important need of hydration of all the cells to keep the body coherent and balanced in the face of the ongoing tendency towards the dominant role that entropy plays in the universe (there is significant medical research that proves the dire consequences of dehydration).

By drinking plenty of M-Water every day the cells will become hydrated (in contrast to not drinking enough high quality water every day.) Based on the principles of hydration there are four fundamental benefits as compared to their opposites by not hydrating properly every day:

1. Better absorption of nutrients
2. More thorough detoxification
3. Increased oxygen to the cells
4. More perfect cell replication

ADDITIONAL INFORMATION ON NMR

Some additional simple explanations of NMR would be helpful for understanding how the Line Width measurements in the frequency of Hertz reveal relative differences in cluster size between different water products as well as tap water as represented on the NMR Chart. As already indicated in the discussion on the NMR Chart page this specific 17O NMR test reflects the speed of molecular rotation: how long it takes for a molecule to return to its original position from spinning around after magnetic alignment. Larger molecular structures such as (water clusters take longer to realign themselves after magnetic induction. The time it takes for this spin to take place is numerically represented in NMR as a Line Width for a comparison of molecular size - the wider the Line Width as a measurement in Hertz, the larger the molecule. A wider line width is represented by a larger number in Hertz frequency. This is very simple to see on a Line Width graph with the single peak and its width defining this number.

There is a simple analogy that can be made with every day objects. Consider two spherical objects: a base ball and a beach ball. The base ball is much smaller than the beach ball. Draw a line around each so that two hemispheres can be seen divided by the line. This line is a circle that divides the two spheres in half. The next thing to do is to position the baseball and the beach ball so that the line around them is vertical and perpendicular to a flat surface the balls can sit on. Rotate the balls from a starting position so that it moves 360 degrees to come back to their starting positions. Move the balls at the same rate (this can be approximated) in a circle so that that the vertical hemisphere line remains vertical. It will take a lot longer for the beach ball to make a complete spin of 360 degrees than the base ball. The relative difference in time it takes for the smaller baseball to spin 360 degrees as compared to the larger beach ball is analogous to the Line Width Measurement.

Because we cannot directly move molecular clusters in circles as we can with much larger objects such as baseballs and beach balls, sophisticated technology has to be used to induce motion via magnetism as well as an indirect means of measurement (water molecules cannot even be seen with the highest electron microscope magnification). Think of the Line Width NMR reading of water in the same way as the time it takes to spin real life spherical objects around. H₂0 molecular clusters are spherical in shape on a very small invisible scale while baseballs and beach balls are spherical and visible on a larger scale with the naked eye. It will take more time for larger water molecule clusters to spin around than smaller water molecule clusters, just as in the case of the baseball and the beach ball.

PLATONIC SOLID GEOMTRY & H₂0 Structure Enhancement PHENOMENON

Another section will be added in the near future to connect what is known in mainstream chemistry and physics about the structure enhancement behavior of H₂0 molecules with the NMR results. Since the NMR Graph reveals that M-Water does have a relatively smaller H₂0 cluster size in comparison to many other water sources, it is the most up to date information from mainstream chemistry and physics that will explain the shapes of the actual H₂0 clusters. The amazing aspect to this knowledge about H₂0 structure enhancement phenomena in water is that it is based solely on the three dimensional solids that Plato discovered over two thousand years ago. Thus, the shapes of H₂0 clusters in water are based on what are traditionally called Platonic solids. Much of this information is based on the writings associated with Dr Martin Chapman, a renounced Professor of Applied Science at London South Bank University in England who has dedicated much of his career to the study of water, and the detailed bibliography he supplies on his website. Dr. Chapman provides most of the necessary information that supports my presentation on molecular geometry of H₂0 structure enhancement supported by mainstream chemistry and physics. The latest discoveries about the human cell in terms of how water moves in and out of the cell further support the health benefits from drinking water with a relatively smaller H₂0 cluster size. There is a growing body of evidence based on preliminary studies to support this contention. The details about the chemistry, physics and biology of dehydration will follow in another section to be added soon. Also down the road additional hydration studies will be completed with a technology called Bio Impedance Analysis.